1200MM 15W SMD LED T8 tube BL-T8L120P15

Product details:
Compared with traditional fluorescent tube light, our LED T8 tube have the advantages:
1. Low Power Consumption: Generally speaking, the voltage per SMD LED is 2-3.6V, current 0.02A-0.03A, very low using voltage and current, it is very low power consumption. equals to 1/8 of incandescent light,1/4 of traditional light;
2. Long Life Span: Under proper current and voltage condition, the life span of SMD LED T8 tube can reach 100,000 hrs, compared with the other LED tubes(like Dip LED), the optical decay reduce from 10% to 5% in 3000hrs. Produced by Automatic equipment, via heat emitting technical process, the life span of SMD LED is longer;
3. High Brightness: Mainly adopted 3528 SMD high brightness chip, single SMD LED can reach 6-7lm;
4. Environmental Protection: SMD LED is an typical green lighting source, made of innoxious material, while fluorescent light contains mercury caused environment pollution. Meanwhile, LED T8 tube can be used circularly, work long time, the temperature less than 45 degree, safe to touch, no ultraviolet and infrared radiation in the spectrum, decrease the discharge of carbon and sulfur diaoxide to protect the environment. Direct current working condition, improving the light CRI≥0.7, keep the color of the articles’ trueness, and protect people's sight;
5. Energy Saving: Direct current driver, lower power consumption, the energy transform rate reaches 95%, saving 60-70% electricity compared with traditional light, with the same illumination efficiency;
6. Low Heat Emitting: Traditional light generate abundant of heat, while LED tube transfer the electric energy into light energy, no waste, and will not harmful radiation to make the color of the files and cloth faded;
7. Little Accessories Fee: LED T8 tube light with small power reaches the same light efficiency, equals to about 30% of the traditional light, small accessories investment, without ballast, low voltage, cold light source will not lead to fire disaster, so the wire spec, is much lower than the current light used, since the long life span of LED, the cost of maintenance also lower;
8. Durability: LED chip is enveloped by the epoxy resin, more durable than bulb and fluorescent light, the light body is very solid;
9. Stabilization: Adopt inside driver AC85~165V, AC165~265V, two voltage ranges, with heat emitting process, SMT automatic soldering, stable quality;
10. Easy Mounting: The users owned the light holders, move away the starters or electrical ballast(cut off the wire of ballast, connect the AC voltage);
11. Safety: Low voltage start, separate voltage range design, the light can work normally under the proper voltage, to avoid influencing the work condition caused by low or high voltage, suitable for different areas all over the world, more security!
     As above mentioned, the advantage of the LED tube is very standout, although the initial invest is high, the energy saving in the future is efficient. In a word, it must be a trend to replace traditional light by LED light.

Main features:
1. LED Sources: 3528 SMD LED, super brightness;
2. LED Quantity: 240 pcs;
3. Dimension: 1200*26mm;
4. Beam Angle: 120° viewing angle;
5. Power: 15W, can replace 45W traditional fluorescent tube light;
6. CCT: warm white (3000-4000K), pure white (5500-6500K), cold white (7000+K);
7. Luminous flux: 1400-1800lm;
8. Angle of pin&light: 90 degree or 180 degree is available;
9. Current enter way: two side or single side is ok;
10. Input voltage: AC85~165V, AC165~265V;
11. CE, RoHS compliant;
12. Warranty time: 2 years.

LED T8 tube using caution:
1. For indoor use only;
2. Don't use the tube in alkaline environment;
3. The tube is not dimmable, please don't connect with the dimmer.

Application:
-- Offices
-- Shopping malls
-- Exhibition Gallery
-- Library
-- Factories
-- Closet
-- Recreation application